Trailer Protection, Theft Prevention
Home Products Information Ordering/Pricing Links
         

 

Pro Tec System
with lifetime warranty

Trailer Security Systems


The PRO-TEC System is designed to monitor and protect the trailer and it's contents. Any movement of the trailer will be detected by the built in, adjustable acceleromter, or the opening of a door. This will cause the electrical brakes of the trailer to be applied in addition to the sounding of the 128db waterproof siren provided, and the flashing of your trailers running lights.

The optional paging system automatically pages you when the alarm becomes activated. This provides you with a one mile area of notification. Gone are the days of looking out hotel or restaurant windows to check the trailer or trying to find your crew or drivers at the track. By use of the manual pager button you or your crew can be alerted that you are needed back at the trailer. The paging system has three parts. The transmitter unit and manual paging button located inside the trailer, and the pager unit attached to your person. Several pagers can function with one transmitter, allowing your entire crew to be in contact at the touch of a button. The PTS-2 has an additional optional feature by using an interior keypad to arm and disarm. The keypad is user friendly and easily programmed. The PTS-2 is also equipped with a low battery alert system. 

The system is remotely controlled and comes complete with all hardware and universal door switches. You supply the wire and an automotive type battery, preferably mounted inside the trailer. With the optional pager, you supply an AM / FM antenna. Or you can utilize your existing antenna. Optional switches and motion detectors are available for professional installations. (Motion detector is to be used to sense motion inside the trailer, NOT the motion of the trailer). Motion detector has both K-band microwave and PIR technology. PRO-TEC System has been designed specially for easy installations.

PTS-1 no longer available!

Installation Instructions PTS-2

Installation Instructions PTS-1

Pictures of client installs

 
Pro Tec System Control Unit - Monitors all doors and any movement of trailer by means of adjustable acceleromter and pin switches. Contained in a weather resistant plastic mounting box
Siren - Water resistant 128db sound

Brackets (3): Universal steel mounting brackets and installed pin switches(3):
Polycarbonate shaft
Stainless steel spring
Nickel plated steel body
Tin Plated Brass QC Terminal
Easily Adjusted

Key chain remote control units that arm/disarm at a range of up to 200 feet. 2 Included. (Additional Remotes available)

Pager - Monitors the status of Pro Tec System or manual paging button with different beeping sequences

Connects directly to Pro Tec System and will transmit up to a one mile radius when alarm or manual pager is activated.

Manual Paging Button - Allows a person to activate the pager on demand to notify the trailer owner that they are looking for him/her.
Options
PN # KP-1
Optional Interior Keypad


For use only with the Model PTS-2

The keypad is user friendly and easily programmed.

PN # MD-1
Optional Motion Detector

Dual Technology with Microcontroller for False Alarm Immunity. The latest generation motion sensor uses two technologies (microwave and PIR) plus a microcontroller provides outstanding false alarm immunity without compromising detection. Motion detector is to be used to sense motion inside the trailer, not the motion of the trailer.


PN# SM
Optional Switch
Standard Gap: 1.0"

Spacers, covers, and screws included.

Automated gas-tight splice is soldered and epoxy covered to provide unequal electrical integrity and protection from corrosion and torque.
White, Brown, Gray.
SPDT : To be used as a normally open circuit for Pro-Tec System ONE

PN# PF-38
Optional Switch

Completely concealed for attractive installations.
Standard Gap: 5/8" end to end, 3/4" parallel.
4' leads.
Gray only
SPDT : To be used as a normally open circuit for Pro-Tec System ONE